Filter By:
- Parts & Accessories (18)
- Wheels (4)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi - Diameter: 9.5mm - Length: 180mm - 1 axle per bag
$1.80 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually
$11.50 - $48.00
We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims.
- Teravail Tubeless Tape comes in a variety of widths to fit almost any rim.
- Teravail Tubeless Tape is available in a variety of widths and roll lengths.
- Ten-meter length is enough for a single layer on approximately four wheels
$3.99 - $4.99
- Replacement adjustable nut for three-speed internal hubs.
$9.99
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 35mm
- Length: 119mm
- Overall: 140mm
$15.00 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
$16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.
$60.00
• Titanium axles with alloy hardware
• Steel cam mechanism for longevity, and self-lubricating brass bushings
$1,100.00 - $1,400.00
The Roval CLX 32 Disc full-carbon clincher is the perfect performance disc wheel; light, stiff, and fast. The wide internal rim width provides an optimum tire profile for precise handling, stiffness, and aerodynamics. The Center Lock hub makes this an ideal wheel for the muddiest cross-race or fast paced ride. This wheel offers a non-SCS rear hub for traditional QR or 12mm thru-axle compatibility.
$1,100.00
When we set out to create a wheelset built purely for speed, we wanted to make it more than just fast. Not that being fast wasn't a priority, but we were tired of wheels that only performed well in a straight line. In the end, we developed the CLX 64, the fastest wheel that we've ever tested. Not only is it the fastest in the tunnel, but its prestige has been verified with Gold Medals in the men's road race, time trial, and team time trial at the 2016 UCI World Championships.
One of the first questions we get about the CLX 64 is, "Why 64mm instead of 65mm?" To put it simply, it's because 64mm simply tested faster than 65mm. One millimeter, that's how deep our testing goes. Having an in-house wind tunnel allows us to run every possible variation, and after two years of development, 80 variations in rim design, and nearly 300 hours studying tire and frame interactions in the Win Tunnel, we found 64mm to be the fastest iteration for normal riding conditions. In fact, it's even faster than the 80-plus-millimeter-deep wheels they were tested against. Being able to use a shape that's nearly 20mm shallower than the competition, yet just as low in drag, makes for a wheel that has drastically less side force and steering torque. This translates to less buffeting and more confidence in even the gustiest winds.
Another positive of a shallower rim depth is the reduction in weight that follows using less material. Many deep carbon wheels feel "slow" due to their high inertia value. What's that? Inertia is the amount of force it takes to accelerate or decelerate, and wheels that are built around heavier rims lack the liveliness that many riders crave. Being over a half-a-pound lighter than the other wheels in its aero category, the CLX 64 accelerates, decelerates, and changes direction with less effort.
The rim is not the only component of the CLX 64 that contributes to its aero prowess though, in order to create the fastest wheels, we focused on the wheels as a system, not just a rim with "other parts," and our Aero Flange (AF) hubs play a significant role. Designed completely in the Win Tunnel, our AF hubs feature an incredibly small frontal aero, without sacrificing stiffness, making them aerodynamically efficient.
Taking the advantage a step further, these wheels were developed to work in harmony with modern-width 24C tires. The 21mm internal rim width spreads the tire out, in this case to 26C, making it seamlessly meet the rim. Not only does this create a system with low aerodynamic drag, but one that has exceptionally low rolling resistance and inspiring grip in the corners. And to make sure we checked all of the feature boxes, we also made the rim tubeless-ready.
To top off the multitude of performance features of the rim, we chose the highest quality build components to pair the CLX 64 front with. Starting with DT Swiss Aerolite bladed spokes, which test faster than their round counterparts in the Win Tunnel, we hand-laced the 64 rim to our AF hubs that house CeramicSpeed's legendary bearings. Why hand-built? Machines make mistakes and mistakes aren't something we're ok with, so we have real people lace each wheel by hand.
- Assembly Method: Hand-built
- Brake Track Height: 12mm
- Braking Surface: Carbon fiber
- Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads
- Front Hub: Roval AF1, CeramicSpeed bearings
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rim Depth: 64mm
- Rim Material: Carbon
- Rim Type: Carbon clincher, 2Bliss Ready
- Rim Width: 20.7mm internal, 29.9mm external
- Spoke Count: 16
- Spoke Pattern: Radial
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 695g
$1,400.00
When we set out to create a wheelset built purely for speed, we wanted to make it more than just fast. Not that being fast wasn't a priority, but we were tired of wheels that only performed well in a straight line. In the end, we developed the CLX 64, the fastest wheel that we've ever tested. Not only is it the fastest in the tunnel, but its prestige has been verified with Gold Medals in the men's road race, time trial, and team time trial at the 2016 UCI World Championships.
One of the first questions we get about the CLX 64 is, "Why 64mm instead of 65mm?" To put it simply, it's because 64mm simply tested faster than 65mm. One millimeter, that's how deep our testing goes. Having an in-house wind tunnel allows us to run every possible variation, and after two years of development, 80 variations in rim design, and nearly 300 hours studying tire and frame interactions in the Win Tunnel, we found 64mm to be the fastest iteration for normal riding conditions. In fact, it's even faster than the 80-plus-millimeter-deep wheels they were tested against. Being able to use a shape that's nearly 20mm shallower than the competition, yet just as low in drag, makes for a wheel that has drastically less side force and steering torque. This translates to less buffeting and more confidence in even the gustiest winds.
Another positive of a shallower rim depth is the reduction in weight that follows using less material. Many deep carbon wheels feel "slow" due to their high inertia value. What's that? Inertia is the amount of force it takes to accelerate or decelerate, and wheels that are built around heavier rims lack the liveliness that many riders crave. Being over a half-a-pound lighter than the other wheels in its aero category, the CLX 64 accelerates, decelerates, and changes direction with less effort.
The rim is not the only component of the CLX 64 that contributes to its aero prowess though, in order to create the fastest wheels, we focused on the wheels as a system, not just a rim with "other parts," and our Aero Flange (AF) hubs play a significant role. Designed completely in the Win Tunnel, our AF hubs feature an incredibly small frontal aero, without sacrificing stiffness, making them aerodynamically efficient.
Taking the advantage a step further, these wheels were developed to work in harmony with modern-width 24C tires. The 21mm internal rim width spreads the tire out, in this case to 26C, making it seamlessly meet the rim. Not only does this create a system with low aerodynamic drag, but one that has exceptionally low rolling resistance and inspiring grip in the corners. And to make sure we checked all of the feature boxes, we also made the rim tubeless-ready.
To top off the multitude of performance features of the rim, we chose the highest quality build components to pair the CLX 64 with. Starting with DT Swiss Aerolite bladed spokes, which test faster than their round counterparts in the Win Tunnel, we hand-laced the 64 rim to our AF hubs that house CeramicSpeed's legendary bearings and DT 240 hub internals at the rear. Why hand-built? Machines make mistakes and mistakes aren't something we're ok with, so we have real people lace each wheel by hand.
- Assembly Method: Hand-built
- Brake Track Height: 12mm
- Braking Surface: Carbon fiber
- Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rear Hub: Roval AF1, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed
- Rim Depth: 64mm
- Rim Material: Carbon
- Rim Type: Carbon clincher, 2Bliss Ready
- Rim Width: 20.7mm internal, 29.9mm external
- Spoke Count: 21
- Spoke Pattern: Radial/Two-cross (2:1)
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 850g
$13.59
Origin-8's Torq Lite Track Cog Lock Ring 1.29" x 24 tpi with left-handed threaded thread is the only lock ring you need. Hardened threading and extra material make this highly durable to help you go the distance.
$20.39
- AL6061 alloy tubeless Presta valve
- Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim
- Removable valve core for installing sealant
- Additional replacement valve cores sold separately
- Sold individually
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable
$6.50
- Strong nylon reinforced PVC for a secure fit
- Handles high-pressures; does not rot
- 0.5mm thick
$38.90
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and to perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
$25.99
Upgrade or refresh your bike.
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
PRODUCT DETAILS
- Original equipment replacement kids wheels
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
Page 1 of 1